| All
About Quality
Features of
an Artage quality product:
1.Welded frame construction.
In the manufacturing of our tables only top grade hot
and cold rolled steel bars and 16 Guage tubing is used.
All frames are fully-welded in jigs to ensure consistent
quality and completely rigid construction. This eliminates
the instability caused by loosening which is a feature
of screwed-together tables.
2.Oven-baked,
electrostatically-applied powder paint base coat.
Each frame is thoroughly cleaned before painting by
immersion in a phosphate solution to remove all grease,
rust etc. and then receives a base-coat paint finish
of electrostatically-applied powder which is baked
at 420 degrees F.
3.Hand-applied, acrylic
lacquer paint finish coat and highlights.
Each table receives a final stage finish that is hand
applied, giving individual random character to each piece.
4.Packaging.
Great care is taken in packaging each item to ensure
safe delivery to the customer. Each table frame
is individually bagged in a plastic bag and then packed
in a 200 test double-wall corrugated carton.
All 10mm and 12mm overhang glass is individually packed
in a specifically designed 200 test double wall glass
pack which is sufficient to withstand rough handling
in transit. Inset glass is packed in 175 test
single wall corrugated sleeves that then goes into
the frame carton. Where applicable, wood tops
and frames are wrapped in polyfoam and stretch film
and enclosed in a corrugated sleeve which is inserted
into the frame carton. All hardware and instructions
are enclosed in an envelope and attached to the table
frame. |
